Do you have a question?
Email me when this product is available
OBD Adapter KTM EXC EURO4
OBD Adapter KTM EXC 6-Pin (Euro4) to OBD2 – K-Line + CAN-Bus with Ignition Activation
This adapter connects your OBD2 diagnostic device to the 6-pin KTM diagnostic socket on your EXC.
The special feature of the EXC off-road models: They do not have an ignition switch. In order for the control unit to be accessible, the ignition must be switched on via the diagnostic socket. This is exactly what this adapter does – Pin 5 is additionally connected to ground, which automatically activates the ignition when plugged in. Reading fault memory, displaying live data, or resetting service intervals can then be done directly with your OBD2 tester, without a manufacturer-specific diagnostic cable.
Important note
The adapter must not be left connected to the motorcycle permanently. As long as it is plugged in, the motorcycle's ignition remains switched on permanently – this will drain the battery. Always disconnect the adapter after performing the diagnosis.
Suitable for
- KTM EXC models (Euro4) with 6-pin KTM diagnostic socket
Please check before purchase whether your motorcycle has the 6-pin KTM socket. Euro5 models with the new 6-pin connector according to ISO 19689 require a different adapter. For road models with an ignition switch, ignition activation via Pin 5 is not required.
Red connector = EURO4
White connector = EURO5
Pin assignment
| OBDII / OBD2 Connector (socket) |
KTM 6-Pin connector |
|
|---|---|---|
| 16 | VBAT +12V | 1 |
| 6 | CAN high | 2 |
| 14 | CAN low | 3 |
| 7 | K-Line | 4 |
| 4 | GND | 6 |
| 5 | ||
| – | GND (Ignition ON) | 5 |
Technical data
- Vehicle side: KTM 6-pin diagnostic connector (Euro4), Pin 5 bridged to ground (ignition activation)
- Device side: 16-pin OBD2 socket (female)
- Connected lines: CAN high, CAN low, K-Line, +12V, ground
Scope of delivery
1x OBD adapter KTM EXC 6-pin to OBD2