Do you have a question?
Email me when this product is available
OBD Adapter KTM EXC EURO5
OBD Adapter KTM EXC Euro5 6-Pin to OBD2 – K-Line + CAN-Bus with Ignition Activation
This adapter connects your OBD2 diagnostic tool to the 6-pin Euro5 diagnostic socket on your EXC. The adapter carries both the CAN-Bus and the K-Line, covering both diagnostic protocols used by KTM on Euro5 models.
The special feature of the EXC off-road models: they do not have an ignition switch. In order for the control unit to be accessible, the ignition must be switched on via the diagnostic socket. This is exactly what this adapter does – Pin 1 is additionally connected to ground, which automatically activates the ignition when plugged in. Reading fault memory, displaying live data, or resetting service intervals can then be done directly with your OBD2 tester, without a manufacturer-specific diagnostic cable.
Important Note
The adapter must not be left connected to the motorcycle permanently. As long as it is plugged in, the motorcycle's ignition remains switched on permanently – this will drain the battery. Always disconnect the adapter after performing the diagnosis.
Suitable for
- KTM EXC models (Euro5) with 6-pin Euro5 diagnostic socket
Please check before purchase whether your motorcycle has the 6-pin Euro5 socket. Older EXC models up to Euro4 have a different 6-pin connector and require a different adapter. For road models with an ignition switch, ignition activation via Pin 1 is not required.
Pin Assignment
| OBDII / OBD2 Plug (female) |
Euro5 6-Pin Plug |
|
|---|---|---|
| 16 | VBAT +12V | 4 |
| 6 | CAN high | 2 |
| 14 | CAN low | 5 |
| 7 | K-Line | 6 |
| 4 | GND | 3 |
| 5 | ||
| – | GND (Ignition ON) | 1 |
Technical Data
- Vehicle side: 6-pin Euro5 plug (ISO 19689), Pin 1 bridged to ground (ignition activation)
- Device side: 16-pin OBD2 socket (female)
- Conducted lines: CAN high, CAN low, K-Line, +12V, ground
Package Contents
1x OBD adapter KTM EXC Euro5 6-pin to OBD2